Kenwood Digi Interface with PTT -PSK,PSK31,RTTY,SSTV / ALL RADIO with 13 PIN DIN

 

USB KENWOOD Digital Interface with PTT control
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax, Echolink and other digimodes
HF/VHF/UHF(Hardware version 5)

Compatible with ALL KENWOOD with 13 PIN DIN ACC JACK . This interface allows your PC or Laptop, to decode/encode digital signals using free (or paid) software.

3 in 1 - BEST VALUE FOR MONEY
USB audio interface + Digital Interface + PTT control
*** sold tens of them ***

• No need to use your PC, Laptop or Netbook soundcard 
• No need to use internal or USB serial port.
  
• No need to plug and unplug your mic & speakers. Just connect it to a free USB port
• No need for drivers
• PnP with Windows XP, Vista, 7, 8 and all OS that support generic audio interface
• Supports FLDIGI, MMSSTV, DIGIPAN, MultiPSK and any other program that can send PTT tone to right audio channel or play the digital signal to both audio channels
  
• You can download software clicking HERE

Why pay more for less? Pay less for more!

HOW TO:

• Connect USB Interface to a free USB port (OS will detect it and install drivers)
• Open your application and configure it to use the proper audio device and select audio mono output or PTT tone to right audio channel. If you can't find such options, probably application sends signal to both audio channels.
• Tune your radio to a digi mode frequency
• Open USB Audio properties, adjust audio output and MIC level tho the highest level. If it is necessary, disable Mic AGC.
• Plug 13 pin DIN connector to Kenwood  ACC Socket. Be careful not insert it wrong.
• Tune your radio to a digimode frequency.
• Use green potentiometer to adjust audio until you have the proper receiving (RX) level.
• Use red potentiometer to adjust transmitting (TX) level (check ALC level). When transmits, red led turns on.
• Some models not use standard pins. Set the switch (at the right side) to the best position for you radio.
 

Interface is assembled and tested.
Total interface length with cable is ~1m. Cable, box or jack color could vary.
USB cable not included.
Dimensions: 6.5x8.7x2.6cm (2.56x3.42x1.02in)
Notice: Box is custom designed and build with 3D printer. Good quality but not perfect like molded boxes. Please see gallery photos at the top for more detailed view.
Before you order, please read carefully the item's description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.
  

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback. For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Check out my other items. Add me to your favorites list.