ICOM Iphone/Android PTT Interface-PSK,PSK31,RTTY,SSTV - IC-78, IC-703, IC-706, IC-718, IC-7000, IC-7200, IC-7410, IC-9100

 
ICOM
Digital Iphone/IPad - Android RX/TX Interface with PTT control
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax and other digimodes

HF/VHF/UHF

Compatible with ICOM IC-78, IC-703, IC-706, IC-718, IC-7000, IC-7200, IC-7410, IC-9100 and variations of these models (transceivers not included) and all other radios with DIN 13 pins ACC socket.

This interface allows your IPhone, IPad, IPod & Android devices (phone or tablet) to decode/encode Digital mode signals using free (or paid) software.

Notice: Interface to be compatible with a phone/tablet device, must use a TRRS jack with outputs as shown at the picture. Also, all phone or table headsets to be recognized from the device must have a resistance between Common and Mic Input. The connected resistor to the interface is 1.6K and tested with android/apple phones and tablets. Also can work with windows devices that use same jack.

TRRS Jack

Interface can recognized from almost any device. To be sure, use an Iphone (4, 5, etc) headset connected to your phone/tablet. If you can talk and listen, then probably you will not have any problem.
For better tune, two potentiometers allows you to adjust in and out audio level.

• Compatible with IPhone, Ipad, Ipod, Android phones or tablets.
• Tested with many different brands and models without a problem.
• Supports any digi program written for Apple iOS and Android phones or tablets.
• No need for battery. Powered from ACC socket.
 

HOW TO:

• Plug the 13 pin connector to your radio ACC socket.
• Connect audio jack to the headphone/Mic jack of your phone or tablet.
• Turn on interface (black switch at the left side). A green led turns on at the front.
• Tune your radio to a digital mode frequency.
• Lower the transceiver's volume to be sure that phone/tablet does not receive sound from the internal microphone.
• Check if phone volume is full open.
• Use green potentiometer to adjust audio until you have the proper receiving (RX) level.
• Tune your radio to a digital mode frequency.
• Use red potentiometer to adjust transmitting (TX) level. When transmits, red led turns on.
• Use switch (at the right side) to select HF or VHF PTT pin control. 

Interface is assembled and tested.
Total interface length with cables is ~1.5m. Cable, box or jack color could vary.
When is in receive mode, consumption is 6mAh and 11mAh when PTT.
Notice: Box is custom designed and build with 3D printer. Good quality but not perfect like molded boxes. Please see gallery photos at the top for more detailed view.

Before you order, please read carefully the item's description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback.
For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Check out my other items. Add me to your favorites list.