Universal USB audio RX Digital Interface PSK

Universal RX Digi Interface
For ALL Radio, Transceivers, Scanners, receivers
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax and other digi modes, CW Morse 
HF/VHF/UHF

With this interface you can receive and decode almost any digi mode and CW Morse. Works with ALL Radio, Transceivers, Scanners Receiver (Yaesu, Kenwood, Icom, Alinco, Motorola, Uniden, Realistic, etc) with plug (3.5) for external speaker or headphones.

 Includes USB audio interface + Digi Interface

• No need to use your PC, Laptop or Netbook soundcard
• No need to plug and unplug your speakers. Just connect it to a free USB port
• No need for drivers
• PnP with Windows XP, Vista, 7 and all OS that support generic audio interface
• Supports FLDIGI, MMSSTV, DIGIPAN, MTTY, MultiPSK, MixW and almost any other digi program. You can download software clicking HERE

HOW TO:

• Connect USB Audio (2) to a free USB port (OS will detect it and install drivers).
  
• Plug the jack (1) to the External speaker o Headphones output of your Radio/Scanner/Receiver. If it is necessary, use an adapter.
• Lower audio volume.
• Run your digi program and configure it to use the proper audio device.
• Tune your radio to a digi frequency.
• Open USB Audio properties and adjust MIC level and audio output level. If it is necessary, disable Mic AGC.
• Slowly open the volume of your Radio/Scanner/Receiver.
• If you want, you can connect headphones or speakers to output of USB audio card, to monitor receiving signal.

Interface is assembled and tested. Cable Length is 1m. USB audio, cable and jack color, could vary.

• We ship to confirmed addresses
• First priority shipping next business day with tracking number
• Normally delivered within 4-10 business days after shipping

  

Check out my other items. Add me to your favorites list.