Yaesu Iphone/Android PTT Interface-PSK,PSK31,RTTY,SSTV / FT-100,817,857,897

 
YAESU Digital Iphone/IPad - Android RX/TX Interface with PTT control
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax and other digimodes

Mini din 6 pins connector

HF/VHF/UHF

Compatible with Yaesu FT-100, FT-817, FT-857, FT-897, FT-450, FT-950, FT-991, FT-1500, FT-3000, FT-7100, FT-7800, FT-7900, FT-8000, FT-8100, FT-8500, FT-8800, FT-8900, FT-DX1200, FT-DX3000 and variations of these models (transceivers not included) and all other radios with mini din 6 pins input/output data port.

This interface allows your IPhone, IPad, IPod & Android devices (phone or tablet) to decode/encode Digital mode signals using free (or paid) software.

TRRS Jack

Notice: Interface to be compatible with a phone/tablet device, must use a TRRS jack with outputs as shown at the picture. Also, all phone or table headsets to be recognized from the device must have a resistance between Common and Mic Input. The connected resistor to the interface is 1.8K and tested with android/apple phones and tablets. Also can work with windows devices that use same jack.

Interface can recognized from almost any device. To be sure, use an Iphone (4, 5, etc) headset connected to your phone/tablet. If you can talk and listen, then probably you will not have any problem.
For better tune, two potentiometers allows you to adjust in and out audio level.

• Compatible with IPhone, Ipad, Ipod, Android phones or tablets
• Use it with you base or mobile radio
• Tested with many different brands and models without a problem.
• Supports any digi program written for Apple iOS and Android phones or tablets.

HOW TO:

• Plug the 6 pin mini din connector to your radio.
• Connect audio jack to the headphone/Mic jack of your phone or tablet.
• Turn on interface (black switch at the left side). A green led opens at the front.
• Tune your radio to a digital mode frequency.
• Lower the transceiver's volume to be sure that phone/tablet does not receive sound from the internal microphone.

  

  Front side

• Check if phone volume is full open.
• Use green potentiometer to adjust audio until you have the proper receiving (RX) level.
• Tune your radio to a digimode frequency.
• Use red potentiometer to adjust transmitting (TX) level (check ALC level). When transmits, red led turns on.

Interface is assembled and tested.
Total interface length with cables is ~1.5m. Cable, box or jack color could var.
9V battery not included.
When is in receive mode, consumption is 6mAh and 11mAh when PTT
Dimensions: 6.2x10.5x25mm (2.44x1.13x0.98in)
Notice: Box is custom designed and build with 3D printer. Good quality but not perfect like molded boxes. Please see gallery photos at the top for more detailed view.

Before you order, please read carefully the item's description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.

Please remember to leave feedback when you receive and test interface. I ask you to give me positive feedback.
For any problem, question, help or if you are not satisfied, contact me (taloseshop[at]gmail.com). I will be glad help to resolve any problem.

Check out my other items. Add me to your favorites list.

IPhone-IPad/Android Universal RX Digi Interface

IPhone-IPad/Android Universal RX Digi Interface
For ALL Radio, Transceivers, Scanners, receivers
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax and other digital modes, CW Morse 
HF/VHF/UHF

With this interface you can receive and decode almost any digital mode and CW Morse. Works with ALL Radio, Transceivers, Scanners Receiver (Yaesu, Kenwood, Icom, Alinco, Motorola, Uniden, Realistic, etc) with plug (3.5) for external speaker or headphones.

• Compatible with IPhone, IPad, IPod, Android phones and tablets.  
• Tested with many diferent brands and models without a problem.
•  Supports any digi program writen for apple and android phones and tablets.
  
  

HOW TO:

• Plug the jack (1) to the External speaker or Headphones output of your Radio/Scanner/Receiver. If it is necessary, use an adapter. 
• Lower audio volume of Radio/Scanner/Receiver.
• Connect Audio jack (2) to the headphone/Mic jack of your phone or tablet.
• Run digi program 
• Tune your radio to a digi frequency.
• Slowly open the volume of your Radio/Scanner/Receiver.
• If you want, you can connect headphones or speakers to output of USB audio card, to monitor receiving signal.

Interface is assembled and tested. Cable Length is 1m. Cable and jack color, could vary.

• We ship to confirmed addresses
• First priority shipping next business day with tracking number
• Normally delivered within 4-10 business days after shipping

Check out my other items. Add me to your favorites list.

Universal USB audio RX Digital Interface PSK

Universal RX Digi Interface
For ALL Radio, Transceivers, Scanners, receivers
PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax and other digi modes, CW Morse 
HF/VHF/UHF

With this interface you can receive and decode almost any digi mode and CW Morse. Works with ALL Radio, Transceivers, Scanners Receiver (Yaesu, Kenwood, Icom, Alinco, Motorola, Uniden, Realistic, etc) with plug (3.5) for external speaker or headphones.

 Includes USB audio interface + Digi Interface

• No need to use your PC, Laptop or Netbook soundcard
• No need to plug and unplug your speakers. Just connect it to a free USB port
• No need for drivers
• PnP with Windows XP, Vista, 7 and all OS that support generic audio interface
• Supports FLDIGI, MMSSTV, DIGIPAN, MTTY, MultiPSK, MixW and almost any other digi program. You can download software clicking HERE

HOW TO:

• Connect USB Audio (2) to a free USB port (OS will detect it and install drivers).
  
• Plug the jack (1) to the External speaker o Headphones output of your Radio/Scanner/Receiver. If it is necessary, use an adapter.
• Lower audio volume.
• Run your digi program and configure it to use the proper audio device.
• Tune your radio to a digi frequency.
• Open USB Audio properties and adjust MIC level and audio output level. If it is necessary, disable Mic AGC.
• Slowly open the volume of your Radio/Scanner/Receiver.
• If you want, you can connect headphones or speakers to output of USB audio card, to monitor receiving signal.

Interface is assembled and tested. Cable Length is 1m. USB audio, cable and jack color, could vary.

• We ship to confirmed addresses
• First priority shipping next business day with tracking number
• Normally delivered within 4-10 business days after shipping

  

Check out my other items. Add me to your favorites list.

 

USB VOX Interface - PSK, PSK31, RTTY, SSTV, Echolink - Yaesu FT-857, 897, 450, 950

 
YAESU USB VOX Digital Interface
Echolink, PSK31, PSK, RTTY, SSTV, NBEMS, JT-65, WeatherFax and other digimodes
HF/VHF/UHF

Yaesu Data port pin out

Works with Yaesu FT-857, 897, 450, 950 (transceivers not included) and all other radios that they support VOX operation and mini din 6 input/output data port. This interface allows your PC or Laptop, to decode/encode digital signals using  free (or paid) software. 

2 in 1 - Best value for money - Tens of them sold
USB audio interface + Digital Interface
*** sold tens of them ***

• No need to use your PC, Laptop or Netbook soundcard
• No need to plug and unplug your speakers. Just connect it to a free USB port
• No need for drivers
• PnP with Windows XP, Vista, 7, 8 and all OS that support generic audio interface
• Supports FLDIGI, MMSSTV, DIGIPAN, MTTY, MultiPSK, MixW and almost any other sound card program.
• You can download software clicking HERE

Why pay more for less? Pay less for more!

HOW TO:

• Connect USB Interface to a free USB port (OS will detect it and install drivers)
• Plug 6 pin mini-din to Yaesu Data port
• Open your application and configure it to use the proper audio device
• Tune your radio to a digimode frequency
• Enable VOX operation to your radio and check VOX Level
• Open USB Audio properties, adjust audio output level and MIC level. If it is necessary, disable Mic AGC

Interface is assembled and tested. Cable Length is 1.5m. USB audio, cable or jack color could vary. Before you order, please read carefully the item's

description. Check your radio manual to confirm that is compatible and how to set the correct settings.

• Ship to confirmed addresses
• First priority shipping next business day with tracking number (You can check shipping date from purchase history).
• Shipping and handling charges covers the real cost for first priority registered post
• Normally delivered within 3-7 business days after shipping
• I suggest you to use 17track to track your order. If its necessary, choose your destination country.
• Notice: Delivery to some countries/areas may experience some delay. I am not responsible for that. I ship fast.
  

Feedback received:

• Great product for HAM RADIO. Thank you. Good Dx´s!
• «:::P:::» «:::E:::» «:::R:::» «:::F:::» «:::E:::» «:::C:::» «:::T:::»73's
• Fast shipment, well packed, item exactly as described. Recommended!
• This does actually work with Echolink! thanks!
• Great seller, fast shipping
• arrived safely and was packed to protect my item, thks for a great item !
• Fast shipping, Item was exactly what I was looking for. And a great price too!
• 15 minuti dopo l'apertura del pacco ero in aria e facevo qso in psk31:fantastico
• Super Interface SSTV totalement compatible , Tres bon produit ++++++++++++++++
• Fast shipping AAAAAAAAAA++++++++++++++++
• gREAT SELLER WİTH FAST SHİPMENT A+++
• Seriedad y rapidez
• Item received promptly and exactly as described. Excellent ebayer!
• Digital interface works OK in my setup (FT-897). Great utility for the price.
• Dana ondo, arin eta primeran dabil
• fast shipment, product as described. Thank You!
• Très rapid
• Top, danke!
• Great seller, fast shipping
• negozio serio e disponibile. Consigliato a tutti i radioamatori
• All is well, thank you very much!
• Fast shipping. Love it!!!!!
• arrived OK and checked out fine on my Ft-450
• Alles bestens, Kontakt auch nach dem Kauf super
• Exactly as offered. Perfect & works good too! Solid deal!
• Shipper Stands Behind His Product and resolves problems quickly!

Please remember to leave feedback when you receive and test interface.
I ask you to give me positive feedback because:

• Description is as accurate as I can.
• I answer to all messages before or after selling and I try to help everyone needs more info about settings or everything else.
• I ship next business day. If item not received on time, contact me immediately.
• Shipping and handling charges are my real cost.
• 
  
• For any problem, question or if you are not satisfied, contact me. I will be glad help to resolve any problem.

Check out my other items. Add me to your favorites list.